JBL Project EVEREST DD66000 User Manual page 32

CHAPTER 13
The Project EVEREST DD66000 System Specifications
Low Frequency Driver :
High Frequency Driver :
Ultra-High Frequency Driver :
Power Handling (RMS) :
Frequency Response (-6dB) :
Low Frequency Extension (-10dB) :
Nominal Impedance :
Sensitivity (2.83V@1m) :
Horn Directivity (horizontal x vertical) :
High Frequency :
Ultra-High Frequency :
Crossover Frequency :
Control Function :
Finish :
Dimensions :
Weight :
Package Weight :
380mm (15") Pulp-Cone Woofer (1500AL) x 2
100mm (4") Beryllium Compression Driver (435Be)
25mm (1") Beryllium Compression Driver (045Be)
500W
45Hz – 50kHz
32Hz
8 ohms nominal
5.5 ohms @ 85Hz
3.5 ohms @ 40kHz
96dB
100º x 60º
60º x 30º
150Hz (LLF LPF -6dB/oct)
700Hz (LF LPF -24dB/oct)
20kHz (UHF HPF -24dB/oct)
HF Level Control (-0.5dB / 0dB / +0.5dB)
LF Level Control (Low / High)
LF / HF Drive Mode Switch (Normal / Bi-Amp)
System Orientation Switch (Left / Right)
Santos Rosewood (Black Leather Baffle / Gray Grille)
Cherry (Black Leather Baffle / Gray Grille)
Ebony (Black Leather Baffle / Gray Grille)
- Made-to-order
Maple (Cashmere Leather Baffle / Light Gray Grille)
- Made-to-order
965mm (w) x 1,109mm (h) x 469mm (d)
(incl. feet , not spike, refer to figure16)
137kg without grille
142kg with grille
174kg