5 Chassis Board
5.1.
Chassis Installation
1. Fix 12 screws to 'A-board' and 'P-board'.
Tightening torque should be 50 Ncm to 80 Ncm (5 kgf cm to 8 kgf cm).
2. Fix connectors G1, G2 and G3 to AT G-board.
3. Fix 2 screws to the side of AV bracket assembly.
Tightening torque should be 100 Ncm to 130 Ncm (10 kgf cm to 13 kgf cm).
4. Fix 1 screw to cabinet with power switch PCB bracket.
Tightening torque should be 100 Ncm to 130 Ncm (10 kgf cm to 13 kgf cm).
All manuals and user guides at all-guides.com
9
TX-26LE8A