Care - Radio Shack 43-3887 Owner's Manual

All manuals and user guides at all-guides.com
Symptom
• Make sure the base unit is plugged in.
• Make sure that the answering system is turned
The answering system does on.
not work. • Make sure that the message record time is not
set to Announce only (see "Announce only
feature" on page 59).
• The incoming messages may be too long.
Remind callers to leave a brief message.
Messages are incomplete.
• The memory may be full. Delete some or all of
the saved messages.
After a power failure, the
• Record your greeting again. The default
outgoing message is
message should remain.
deleted.
No sound on the base unit
speaker during call • Adjust the speaker volume on the base unit.
monitoring or message • Make sure the call screen feature is set to On.
playback.
• Make sure you are using the correct PIN number.
Cannot access remote call- • Make sure that the touch-tone phone you're
in features from another using can transmit the tone for at least two
touch-tone phone. seconds. If it cannot, you may have to use
another phone to access your phone.
Time stamp cannot be • Make sure you have set the time (see "Setting
heard. Day and Time" on page 27).
If you still have problems, disconnect the phone. If other phones on the
same line work properly, the fault is in this phone or its installation. If you
cannot find the problem, take the phone to your local RadioShack store
for assistance.

CARE

Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store
the phone only in "room" temperature environments. Handle the phone
carefully; do not drop it. Keep the phone away from dust and dirt, and
wipe it with a damp cloth occasionally to keep it looking new.
Suggestion
71