Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Setting the Area Code
If you enter a 3-digit area code number in
Ô
Ô
NOTES
the "Area Code" option, your local area
code does not appear in the Caller ID
• If the area code has
message. For calls received from outside
already been stored in
your local area code, you will see a full 10-
memory, the stored area
digit number. Ô
code will be displayed.
To change it, use the
DELETE soft key and
number keys to enter the
new area code.
• If your calling area
requires 10-digit dialing,
do not program this
option.
Setting the Dial Mode
Sets the dial mode to tone or pulse. Most
phone systems use tone dialing; the default
setting is tone dialing. Set the dialing mode
to match the dialing system used by your
local phone service.
28
1. Press the
soft key. Select the
MENU
Global Setup menu, and then the Area
Code submenu.
2. Press the number keypad (
a 3-digit area code.
3. Press the
soft key. You will hear a
OK
confirmation tone.
• If you are not sure of your dialing
system, set the unit to tone dialing.
Make a trial call. If the call connects,
leave the setting as is; otherwise set
the unit to pulse dialing.
• If your phone system requires pulse
dialing and you need to send DTMF
tones in certain situations during a call,
you may switch over to tone dialing
(refer to "Tone Dialing Switch Over" on
page 36).
1. Press the
soft key. Select the
MENU
Global Setup menu, and then the Dial
Mode submenu.
2. Press
or
VOL/RING/
VOL/RING/
Tone
Pulse
select
or
.
3. Press the
soft key. You will hear a
OK
confirmation tone.
-
) to enter
0
9
to
Advertisement
Table of Contents
