Yamaha Clavinova CLP-110 Service Manual page 3

ATTACHING THE KEYBOARD STAND STABILIZERS (U Only)
IMPORTANT!
1.
Make sure that you have two stabilizers and four screws (one stabilizer for each of the keyboard stand feet and one 3.5X20mm
screw and one 3.5X14mm screw for each of the stabilizers).
2.
Remove the anti-skid bracket from the rear side of the keyboard stand feet. Keep the anti-skid bracket and screws for future use.
3.
Position the stabilizer on the keyboard stand foot so the rear of the stabilizer extends beyond the end of the foot. Align the rear
foot hole with the rear stabilizer hole. Insert and tighten one of the 3.5X20mm screws. Then insert one of the 3.5X14mm screw
in the front hole, and tighten it. Tighten the screw very firmly since there is no front screw hole on the feet. See the illustration
below.
Do not slide the unit on the floor with the stabilizers attached to the feet. Otherwise, the floor will be scratched.
MAKE SURE THAT ALL SCREWS ARE TIGHTNED FIRMLY.
I SPECIFICATIONS
Keyboard
Sound Source
Polyphony
Voice Selection
Effect
Volume
Controls
Pedal
Demo Songs
Jacks/Connectors
Main Amplifiers
Speakers
Power Consumption
Dimensions (W x D x H)
(with music stand)
Weight
Accessories
Be sure to attach the stabilizers to the keyboard stand prior to use to ensure maximum stability.
Be sure to attach the stabilizers to the keyboard stand feet prior to assembly of the keyboard stand.
88 keys (A-1 - C7)
AWM Stereo Sampling
32 Notes Max.
10
Reverb
Master Volume
Dual, Metronome, Transpose
Damper
10 voice Demo Songs, 50 preset Songs
MIDI (IN/OUT/THRU), PHONES x 2, DAMPER PEDAL
20W x 2
Oval (12cm x 6cm) x 2
48W
1345mm x 426mm x 814mm [52-15/16" x 16-3/4" x 32-1/2"]
1345mm x 426mm x 967mm [52-15/16" x 16-3/4" x 38-11/16"]
36kg (79lbs. 6oz)
Owner's Manual, "50 greats for the Piano" (Music Book),
Bench (included or optional depending on locale), Quick Operation Guide,
Damper Pedal
3.5X20mm screws 3.5X14mm screws
CLP-110
3