Removing, repairing and exchanging
6.3
Removing the protection relay
1.
2.
3.
4.
5.
6.4
Sending protection relay for repair
• In case of product problems, contact the nearest ABB office or representative for
consultation and instructions.
6.5
Exchanging protection relay
• To exchange the protection relay with another identical unit, remove the
protection relay and install the new one.
60
Turn off the power.
Detach the plug-in unit from the case.
Disconnect the wiring.
Loosen the four M5 fixing screws.
Figure 49: Loosening the M5 screws
Detach the case from the panel cut-out.
1MRS757641 G
620 series
Installation Manual