Table of Contents
Advertisement
11.10.3
All protections of remote control cooling are available at forced cooling operation
In forced auto status the A/C operates at remote control mode with a set temp. of 24℃
11.11.1
The set temperature rise 1℃ per hour. Two hours later, the set temperature will maintain as a constant and the fan speed is kept at
The set temperature decrease 1℃ per hour. Two hours later, the set temperature will maintain as a
circulation is kept at low speed (Cold air proof function takes precedence over all).
After an hour running under economic mode, the set temp will rise 1℃,if it is under cooling mode; the set temp will decrease 1℃,if it is
under heating mode; the set temp will be changeless, if it is under fan-only mode; the condition will be the same after the air conditioner
running under economic mode after 2 hours, and during the next time the set temp do not change. The total time is 7 hours, after 7
In case of a sudden power failure, this function automatically sets the unit to previous settings before
37
All manuals and user guides at all-guides.com
Service manual
11.10.4
Forced Auto function
Select forced auto function with the forced auto button or the switch.
11.11
Sleep mode
The sleep function is available at cooling, heating or auto mode
11.11.2
Cooling:
low speed.
The total time is 7 hours, after 7 hours the unit stops
11.11.3
Heating:
The total time is 7 hours, after 7 hours the unit stops
11.11.4
Auto:
hours the unit stops.
11.12
Auto restart function
power returns
constant and the air
the power failure when
Advertisement
Table of Contents
