panthera BAMBINO 3 Assembly Instructions

1) Remove the rear wheels and place the
wheelchair upside down. Take one bracket,
left or right.
4) Place the threaded bushing on it opposite
side.
Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, +46-8-761 50 40, www.panthera.se
ASSEMBLY INSTRUCTIONS
Sid 1
SIDE GUARDS BAMBINO 3
Assembly instructions for:
Side guards Bambino 3
art.nr. 4235001, 4235002, 4235010
Tools needed:
Allen key 3 mm
Allen key 4 mm
2) Put the bracket on the chassis as shown in
the picture and close the bracket. See explo-
ded view on page 3.
5) Tighten securely with a 4 mm Allen key.
3) Fit screw M5x30 mm through the threaded
bushing, welded on the chassis. Tighten with
Allen key 3 mm.
6) Take screw M5x16 mm. Put it in the other
hole and tighten firmly with a 4 mm Allen key.
Art.nr. 8822138
Rev.2021-01