Connection To The Mains - Giles & Posner EK1295 Instruction Manual

Sous vide water oven
Table of Contents

Advertisement

CONNECTION TO THE MAINS

Please check that the voltage indicated on the product corresponds with your supply
voltage.
IMPORTANT
As the colours in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, please proceed as follows:
The wires in the mains lead are coloured in accordance with the following code:
Blue Neutral (N)
Brown Live (L)
Green/Yellow Earth (
)
FOR UK USE ONLY
- Plug fitting details
(where applicable).
The wire coloured BLUE is the NEUTRAL and
must be connected to the terminal marked N
or coloured BLACK.
The wire coloured BROWN is the LIVE wire and must be connected to the terminal
marked L or coloured RED.
The wire coloured GREEN/YELLOW must be connected to the terminal marked with the
letter E or marked
.
On no account must either the BROWN or the BLUE wire be connected to the EARTH
terminal (
).
Always ensure that the cord grip is fastened correctly.
The plug must be fitted with a fuse of the same rating already fitted and conforming to
BS 1362 and be ASTA approved.
If in doubt consult a qualified electrician who will be pleased to do this for you.
If your appliance is supplied with a non-rewireable plug fitted to the mains lead and
should the fuse need replacing, you must use an ASTA approved one (conforming to
BS 1362 of the same rating).
If in doubt, consult a qualified electrician who will be pleased to do this for you.
DISCONNECT IT FROM THE MAINS
If you need to remove the plug -
and then
cut it off the mains lead and immediately dispose of it safely. Never attempt to
re-use the plug or insert it into a socket outlet as there is a danger of an
electric shock.

Advertisement

Table of Contents
loading

Related Products for Giles & Posner EK1295

Table of Contents