Fill Valve Servicing Instructions (continued)
5.
Lift out the center tube as shown
(see Ill. 4).
6.
Remove the strainer from the center
tube as shown (see Ill. 5). Clean the
strainer and cap by rinsing them off
under a faucet.
7.
Carefully reassemble the valve in the
reverse order.
IMPORTANT
Note the position of the cap when it's
properly assembled to the body. The
shown (see Ill. 6).
Flush Valve Servicing Instructions
1.
2.
Remove the tank lid and place it upside down on a
clean surface.
3.
reassembly.
4.
and pull it up to remove it (see Ill. 1).
5.
Remove the clear rubber seal gasket and rinse
under running water to clean (see Ill. 2).
6.
7.
8.
the left and the blue button is on the right.
9.
Carefully, install the tank lid back on the tank.
10. Flush the toilet several times using each push but-
ton to verify proper operation. Check for leakage.
WARNING!
DO NOT USE IN-TANK BOWLCLEANERS. The use of high concentration of chlorine
can cause leakage and property damage. TOTO
CARE AND CLEANING
10
Ill. 5
Ill. 6
RIBS IN LINE
WITH FLOAT
CHAMBER
RIBS
Ill. 1
Ill. 2
Ill. 3
shall not be responsible or liable
®
REFILL PORT
FLOAT
CHAMBER