Powering On/Off; Time And Date - Olitech EasyTel 4G User Manual

Powering On/Off

Following the hardware setup, plug your phone's power
plug into mains power (power point) and turn power point
on. Press and hold the EasyTel 4G's power key (red end call
key) for 5 seconds to power the phone on/off. Please note,
when the EasyTel 4G is connected to mains power but not
powered on, the time, date and a charging icon will be seen
on screen. When the phone is powered on, in addition to
the time and date, the network will be shown and Menu
and Contacts will be seen in the bottom left and right
corners of the screen.
Important information:
Whilst the EasyTel 4G does have a backup battery, it is
strongly recommended that the phone is connected to
mains power whenever possible. The backup battery is
intended as a secondary power source in the instance of
power failure or as a temporary power source if the phone's
location is being changed etc. When the EasyTel 4G is
connected to power the battery automatically charges.

Time and Date

The time and date are automatically updated if there is an
active SIM card in the EasyTel 4G. The time and date can be
manually edited or the time/date format changed in the
phone's settings. To do so:
25