Page 2
Please note, the information detailed in this User Manual (V1) reflects information regarding the EasyTel 4G (OLT2917V2) operating system software and hardware released in January 2022. This product complies with the electrical safety and/or electromagnetic compatibility (EMC) legislative requirements for Australia and New Zealand.
EasyTel 4G Hardware Guide Key Instruction Description 1. Navigation Use this key to navigate through menu options and move cursor to the right/left when entering text/ numbers. The OK key is used to select highlighted text on screen.
Page 5
Description 2. Selection key Use this key to select the function written on the bottom left the screen. Eg: Menu (when on home screen). 3. Emergency Press and hold key for 5 seconds to activate Emergency Key. See page 22 and 33 for more information.
Page 6
Description 7. Number keys Star (*) key Hash (#) key Use these keys to enter numbers and characters. Additional information: When on the main/home screen, if number 1 is pressed and held for 3 seconds, a call to voicemail initiates. If speed dial is programmed, and the associated number key (2-9) is pressed and held for 3 seconds, a call to the programmed phone number initiates.
Page 7
Description 8. Message key Direct access key to Messages. When pressed, Messages open. 9. Mute key Press key to mute your voice during a call. 10. Volume Press volume down key to: down key Decrease ringtone volume when not on an active call; OR Decrease handset/ speaker volume during an active call.
Page 8
Description picture). If the dedicated speed dial key is pressed and the receiver is not lifted, audio will divert to the loudspeaker. 13. Redial key Press this key to dial the last dialled phone number. 14. Handsfree/ This key activates/deactivates the Loudspeaker loudspeaker.
Menu Map and Functions The EasyTel 4G Menu has nine sections outlined below. To access the Menu, press the top left key when on the home/main screen. 1. Contacts Call logs 2.
5. Audio settings Organiser 6. FM radio Emergency key 7. Hotspot Contacts There are two ways the Contacts list can be opened: 1. Press the top right key to select Contacts; OR 2. Press the top right key to select Menu, then select Contacts.
Page 11
Function Selection Menu → Write Only visible when a contact Contacts → message is highlighted and Options is Options → selected. Write Opens a new text message message with highlighted contact pre-filled as recipient. Menu → Method of adding new Contacts →...
Page 12
Function Selection Menu → Copy Allows contacts to be copied Contacts → contacts between the phone and Options → SIM. Copy contacts Menu → Speed Speed dial: Allows keys 2-9 Contacts → dial to be programmed as speed Options → dial keys;...
Scroll to and select Delete multiple Select Phone or SIM Highlight and select contact to be deleted. Select Mark Continue until all contacts you want to delete have a tick in the box to the right of their name. Press the top left key to select Options. Select Delete, press OK Message Function...
Page 14
Function Selection Templates Frequently sent Menu → Message messages can be → Templates created and saved in “Templates.” These templates can then be inserted into SMS. Broadcast Allows emergency Menu → Message message messages to be → Broadcast broadcasted. messages Multiple settings Menu →...
Call Logs Description Selection Missed Displays list of recent Menu → Call logs calls missed calls. → Missed calls Dialled Displays list of recent Menu → Call logs calls dialled calls. → Dialled calls Received Displays list of recent Menu → Call logs calls received calls.
Settings (Call settings) Description Selection Voicemail Allows the voicemail Menu → Settings server speed dial key (1) to → Call settings → be activated/ Voicemail server deactivated (switch) and voicemail number to be programmed. Call divert Program the Menu → Settings conditions under →...
Description Selection Others Allows Call time Menu → Settings minute reminder and → Call settings → Reply SMS after Others rejection to be set. Settings (Phone settings) Description Selection Time and Set date and time; Menu → Settings → date date and time Phone settings →...
Description Selection Revert to default Restore Menu → Settings → factory settings. factory Phone settings → Default password is settings Restore factory 1122. Restoring settings factory settings will erase all data stored on the phone. Settings (other) Description Selection Display Change screen contrast Menu →...
Description Selection Connections Network account, Data Menu → service, Data roaming, Settings → Network selection, Connections Network type and VoLTE. Version Provides details of Menu → software version. Settings → Version Bluetooth Bluetooth settings. Menu → Settings → See page 36 for more Bluetooth information.
Description Selection → Adjust volume, power on/off ringtone and key tone can volume be customised. Ring type Allows the call alert and Menu → message alert to be a Audio settings → Ring type ringtone or silent. Other Allows the key tone, Menu →...
Description Selection must be open, Options selected (top left key) and Pause/Stop selected. Hotspot Description Selection See page 38 for more information Menu → regarding the Hotspot function. Hotspot Hotspot settings: • Open/close hotspot • Password visibility • Hotspot name •...
Organiser Description Selection Alarm Allows alarms to be set Menu→ Organiser → and edited. Alarm details include Alarm name, Alarm Time, Alarm tone (ringtone), Override silent mode and Repeat mode. See page 39 for more information. Calendar Allows Calendar to be Menu→...
Emergency Key Additional information regarding the Emergency key functionality and setup can be found on page 33. Description Selection Settings Emergency key can be Menu → set to off, emergency Emergency key → Settings numbers or emergency services. Set up to 5 phone Menu →...
Hardware Setup 1. Setup phone a) Connect handset to phone via spiral cable. b) Plug the charging cable into the port on the top of the phone (behind screen) and connect charging cable to wall plug. Do not connect to mains power until the battery and SIM card are installed.
Time and Date The time and date are automatically updated if there is an active SIM card in the EasyTel 4G. The time and date can be manually edited or the time/date format changed in the phone’s settings. To do so:...
1. Press the top left key to select Menu. 2. Scroll to and select Settings. 3. Scroll to and select Phone settings. 4. Select Time & date. 5. Complete desired action. Calls Answering an incoming call An incoming call can be answered by either: 1.
Page 27
2. Press loud speaker key and call will initiate (audio via loudspeaker). Method 3: 1. Lift handset. 2. Type the phone number using number keys. 3. Wait 3 seconds and the phone will initiate the call. Note: after any numbers are entered, if there is a three second period where no numbers are entered the call will initiate (regardless of whether the number is complete or not).
M1, and a call will initiate to the phone number programmed to M1. Speed Dial The EasyTel 4G has both speed dial (linked to number keys 2-9) and dedicated speed dial keys (M1, M2, M3). Programming the speed dial keys (2-9) 1.
8. Press the top left key to select OK. To call a phone number via Speed dial, when on the main/home screen, press and hold the desired number key (eg: 2) for three seconds. The call will initiate. Programming the dedicated speed dial keys (M1, M2, M3) 1.
Page 30
sending a text message to a phone number saved to the Contacts list: 1. Press the top right key to select Contacts. 2. Use the search field or up/down navigation key to highlight the contact you want to send a message to. 3.
seen on the bottom left corner of the screen. To view this message, press the top left key to select Read. If, when a new message is received, any other action except pressing the top left key to select Read is performed, the message will need to be accessed through the Inbox.
Page 32
“Abc” “abc” “ABC” - Inputting individual letters When “Abc”, “abc” or “ABC” is displayed to the top right of the text space, individual letters are entered by pressing the number key associated with that letter 1, 2, 3 or 4 times in quick succession until the desired letter appears.
The navigation key can be used to move the cursor when writing text/inputting a number. Emergency key The EasyTel 4G features an emergency key that when pressed and held for 3 seconds, triggers a call sequence. The emergency key can be set up to call pre-programmed phone numbers or an emergency service.
Page 34
Step 1 - Activate the emergency key 1. Press the top left key to select Menu. 2. Scroll to and select Emergency key. 3. Select Settings. 4. Select Emergency numbers (will call programmed numbers when emergency key triggered) OR Emergency services (will call number programmed to “Set emergency services”...
Page 35
If Emergency services has been selected in step 1, the default number that will be dialled when the emergency key is activated is 000. To change this, when in the Emergency key menu: 1. Select Set emergency services. 2. Enter number to be dialled when the emergency key is activated.
To transfer audio to the handset, simply lift the handset from the cradle. Bluetooth Bluetooth allows the EasyTel 4G to connect with other Bluetooth compatible devices. Connecting devices to the EasyTel 4G via Bluetooth Step 1.
Page 37
Pair (top left key). If the device you are connecting to requires a pairing code to be entered it will be requested now. The pairing code is set by the device the EasyTel 4G is connecting/pairing to. Troubleshooting Tips: •...
EasyTel 4G is pairing with. Hotspot The EasyTel 4G can be used as a mobile hotspot. This means you can connect other devices (eg: a tablet, iPad, computer, etc) to the EasyTel 4G. You would use this function if you would like to use the mobile data from the EasyTel 4G’s SIM card in the connected device.
“EasyTel”. Select “EasyTel” from the WIFI list and enter the password. The default password is 12345678. This can be changed in the Hotspot settings on the EasyTel 4G. Alarm The alarm function can be used to set single or recurring reminders.
PIN – If a PIN is set, when the phone is powered on a PIN must be entered. When setting a PIN, the SIM card’s PIN (not the EasyTel 4G’s default PIN) must be entered. After the SIM’s PIN has been entered correctly, the PIN can be changed.
No password/PIN is required to set this function. Blacklist – phone numbers programmed to the Blacklist will be unable to call the EasyTel 4G. Calls from phone numbers in the Blacklist will be blocked. Limited Warranty The Olitech EasyTel 4G is guaranteed by a 12 month warranty (6 month for battery).
Page 42
cm away from TV sets, radio and other automated office equipment in order to avoid electromagnetic interference. • Operating the phone may interfere with medical devices such as hearing aids and pacemakers, or other medical devices in hospital. Consult a physician or the manufacturer of the medical device before using the phone.
Power off your phone and disconnect from power before you clean it. Limitation of Liability Olitech accepts no responsibility or liability for any harm to self or others, loss of profits or indirect, special, incidental or consequential damages resulting from or arising out of...
Troubleshooting If you are having difficulties with the EasyTel 4G, the following information may assist. If the problems persists, contact Olitech. Problem Recommendation When switching on The default password for the the phone, it device is 1122. The PIN is set by prompts enter provider.
Other problems First refer to the user manual, and then check whether the power is connected correctly or not. Restart the phone. Contact Email: support@olitech.com.au Phone: 03 9755 8885 Address: 6/6 Enterprise Drive, Rowville, Vic, 3178...