Hardware Setup - Olitech EasyTel 4G User Manual

1. Setup phone
a) Connect handset to phone via spiral cable.
b) Plug the charging cable into the port on the top of
the phone (behind screen) and connect charging
cable to wall plug. Do not connect to mains power
until the battery and SIM card are installed.
2. Install battery and SIM card
a) Remove battery cover. The battery port can now
be seen in the top left corner (white rectangular
port with three pins). The SIM slot is directly
below the battery port.
b) Insert standard sized SIM card (25 mm X 15
mm). To do so:
i.
ii.
c) Install battery by inserting cable on battery into
the white socket. Ensure the two raised white
ridges are facing up when inserting the battery
cable.
d) Replace back cover.

Hardware Setup

Orient SIM so gold chip is facing down, cut
out on the top right corner.
Slide SIM under the silver bracket until the
right border of the SIM card reaches the
black SIM slot frame. The SIM slides towards
the left under the silver bracket.
24