Bosch Rexroth IndraControl VCH 08.1 Assembly Instruction page 2

About this Document
The assembly instructions describe how to install a VCH 08.1 with EMER-
GENCY STOP button.
For further information, please refer to the project planning manual
"Rexroth IndraControl VCH 08.1", parts number R911320190.
Symbols
This document uses the following symbols to draw the reader's attention to
notices and dangers:
Target Group
All installation work related to the automation system may only be carried
out by qualified personnel (e.g. electricity specialists, electrical engineers).
The personnel installing the device must be qualified to work with the auto-
mation system.
Safety Component according to Machinery Directive
This device is a safety component or part of the safety circuit! Please read
and comply with the safety instructions specified in the respective manual
before installing and setting the device up.
Comply with the regulations of the Machinery Directive 2006/42/EC. Recon-
cile the safety components to the EN ISO 13849-1, EN ISO 13850 standards.
A risk assessment according to EN ISO 14121-1 determines the safety cate-
gory (see EN 60204-1). Check whether further standards must be complied
with.
The present instructions apply for the following device variant:
Device type
VCH08.1EAB-064ET-A1D-064-FS-B2-PW
20. Dezember 2010
Description
VCH08.1 with enabling button, override,
emergency stop button, short cable
2/4
Parts number
R911172138
R911333152-AA_BPZ_DOC