Sony MDS-E10 Service Manual page 54

Hide thumbs Also See for MDS-E10:

Table of Contents

4-1. PARTS REPLACEMENT AND ADJUSTMENT

If a defect such as dropout caused by the OP is found, check the following.

Check Procedure Before Replacement

Mechanism check of sled, etc.

Other cause is likely.

Note: When the spindle motor is replaced, execute "Spdl change" that you can find in the Err Display mode.

Start

Laser power check

Iop Compare

AUTO CHECK

— 54 —

Replace the OP

or replace the

MDM.

Table of Contents