AOVX GX100 Quick Start Manual

AOVX GX100 Quick Start Manual

Goods tracker

Advertisement

Quick Links

AOVX GX100 Quick Start
Goods Tracker
V2.0
www.aovx.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GX100 and is the answer not in the manual?

Questions and answers

Summary of Contents for AOVX GX100

  • Page 1 AOVX GX100 Quick Start Goods Tracker V2.0 www.aovx.com...
  • Page 2: Table Of Contents

    Upgrade LED indications 2.2 How to connect to computer ............5 V2.0 2022/04/06 YUKI Upgrade layout 2.3 How to install USB driver ..............5 2.4 Local configuration ................6 3 LED light indications ................8 Safety Information ..................9 www.aovx.com...
  • Page 3: Introduction

    1 Introduction 1.1 Device overview Figure_1 Overview of GX100 NOTE: Please use the USB cable provided by AOVX. Support GM100, GL100, GG100 series. www.aovx.com...
  • Page 4: Set Up Your Device

    2 Then insert the Nano SIM card; 3 Turn the switch to I. Then check the LED light is in normal state.See LED indicators. Figure_3 Turn the switch to “I” Figure_2 Remove the cover and insert SIM card Figure_4 Check the LED indicators www.aovx.com...
  • Page 5: How To Connect To Computer

    4 You are now ready to use the device on your computer. 2 Then connect the device to computer via USB data to serial port cable. COM1 GX100 Figure_5 Connect device via USB cable 2.3 How to install USB driver Figure_6 Check COM port 1 Please download the USB-to-Serial cable driver here.
  • Page 6: Local Configuration

    ⑦ Reset- Restart the device. ⑧ Quick start- Configure Network and Report interval. ⑨ Device config-configure the device information ⑩ Protocol-configure protocol, report mask, Bluetooth mask, ⑪ sensor mask. Network config-configure band and LTE. ⑫ Figure_7 Config tool window www.aovx.com...
  • Page 7 Quick Start – where all your server and network Report Interval can be configured.More details about G series configuration can be found in GX100 User Manual. Report:Report every 3600s by default. Sample:Sampling every 3600s by default. 2.5 SMS configuration...
  • Page 8: Led Light Indications

    Table 2 LED indication COLOR DESCRIPTION STATE MEANING Charge Charging indicator Flash Battery is absent Full charging or disconnect with USB cable Blue System Flash slowly Work normally indicator Flash quickly Work abnormally Switch off or in sleep mode www.aovx.com...
  • Page 9: Safety Information

    The device is susceptible to water and humidity. AOVX is not responsible for any harm caused by wrong This message contains information on how to operate GX100 safely. By cables used for connection between PC and GX100 following these requirements and recommendations, you will avoid dangerous situations.

Table of Contents