Troubleshooting - Siemens KI85N Series User Manual

Table of Contents

Advertisement

en Troubleshooting
14 Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
Fault
The appliance is not
cooling, the displays
and lighting are lit.
The LED lighting does
not work.
The temperature dif-
fers greatly from the
setting.
The base of the refri-
gerator compartment
is wet.
The appliance hums,
bubbles, buzzes,
gargles, clicks or
crackles.
The appliance makes
noises.
22
Cause and troubleshooting
Showroom mode is switched on.
Carry out the appliance self-test. → Page 23
a Once the appliance self-test has ended, the appli-
ance switches to normal operation.
Different causes are possible.
Call customer service.
The customer service number can be found in the
enclosed customer service directory.
Different causes are possible.
Switch off the appliance. → Page 15
1.
Switch the appliance back on after five minutes.
2.
→ Page 15
If the temperature is too warm, check the temper-
ature again after a couple of hours.
If the temperature is too cold, check the temper-
ature again on the following day.
The condensation channel or drainage hole are
blocked.
Clean the condensation channel and the drainage
hole. → Page 20
Not a fault. A motor is running, e.g. refrigerating unit,
fan. Refrigerant flows through the pipes. The motor,
switches or solenoid valves are switching on or off.
Automatic defrosting is running.
No action required.
Fittings wobble or stick.
Check the removable fittings and, if required, re-
place these.
Bottles or containers are touching.
Move the bottles or containers away from each
other.
Super function is switched on.
No action required.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ki86n series

Table of Contents