Table of Contents
Advertisement
<If the PLATE comes off>
The PLATE is a transparent plastic plate.
and insert its end into place where the blue line is shown in the image.
NOTE: The design of the PLATE was modified after the mass production.
The new types of plates are installed in PX-330WE since the beginning of mass production.
PLATE (Before change)
4. Remove the keyboard PCBs (MACP-KYA1/KYA2, KYB1/KYB2).
MACP-KYA2 PCB
MACP-KYB2 PCB
5. Remove eight rubber keys.
NOTE: One rubber key is shorter than the others.
If the plate comes off, put it on the place where the FFC is,
<Before change>
MACP-KYA1 PCB
MACP-KYB1 PCB
Rubber keys
– 39 –
<After change>
Short rubber key
Rubber keys
Short rubber key
Hide quick links:
Advertisement
Table of Contents
