Trust MI-5500X Quick Start Manual

MI-5500X BLUETOOTH OPTICAL MOUSE

Product information

A: Left mouse button
B: Scroll wheel
LED for when the battery
is empty or being
recharged
C: Right mouse button
D: Previous page in Internet
Explorer

Installation

1
Insert RECHARGEABLE batteries into the battery compartment.
1. Connect the power adapter (N) to the cradle (L) and to the mains power supply.
2. Place the mouse in the cradle (M). The LED (B) will be lit.
2
3. The LED will start to flash once the batteries have been fully charged.
Recommended: charge the batteries for 12 hours before using the mouse for the first time.
Turn on the PC.
3
Connect the Bluetooth adapter.
Windows XP Service Pack 2: wait until Windows states that the device has been installed.
Windows XP Service Pack 1 and Windows 2000: click "Cancel".
4
Continue from step 5 to install the Bluetooth driver.
5 Insert the Trust installation CD-ROM into the CD-ROM drive.
Click "Install driver". 9
6
If no other mouse is connected: close the window by pressing ALT + F4
If no other mouse is connected, use the keyboard:
Open the Windows Start menu by pressing the Windows key or CTRL + ESC.
7
- Use the arrow keys to navigate to "Run".
- Press ENTER.
- Use ALT + TAB to navigate between windows.
Type: "D:\driver\setup.exe". ('D' is an example. A different letter may be used to indicate your CD-ROM
8
drive.)
9 Click "Next".
1. Accept the license agreement.
10
2. Click "Next" twice.
Follow the on-screen instructions.
11
Click "OK".
12
Click "Finish".
E: Next page in Internet
Explorer
F: Bluetooth connection
button
G: Battery compartment
H: Charger connection
I: Movement sensor
J: LED indicator
1
K: Bluetooth connection
button
L: Power connection
M: Mouse cradle
N: Power adapter
7.
UK