Martec SCORPION DC Series Installation Manual

S C O R P I O N D C S e r i e s I n s t a l l a t i o n G u i d e
Thanks for choosing our SCORPION DC Series ceiling fan.
We strongly recommend that you read this manual carefully before installation.
Models Parameters (Fan Only):-
MSF133MR 1320mm 3 Blade Ceiling Fan Matt Black with remote control
MSF133WR 1320mm 3 Blade Ceiling Fan White Satin with remote control
MSF133BR 1320mm 3 Blade Ceiling Fan Brushed Nickel with remote control
Models Parameters (Fan and Light):-
MSF1333MR 1320mm 3 Blade Ceiling Fan Matt Black, 24W Tricolour LED Light with remote control
MSF1333WR 1320mm 3 Blade Ceiling Fan White Satin, 24W Tricolour LED Light with remote control
MSF1333BR 1320mm 3 Blade Ceiling Fan Brushed Nickel, 24W Tricolour LED Light with remote control
Part List:
Qty 1x motor assembly Qty 1x instruction manual
Qty 1x balancing kit Qty 1x hanging bracket
Application
Flat Surface / Ceiling
How to Assemble
Fg.1
Ball seat
rubber
cover
(packed
with
hanger
bracket)
Anti-vibration
washer
Secure the hanger bracket
to ceiling beam or a suitable
piece of timber inserted
between the ceiling beams
using the two long screws
supplied with the package.
(See Fg.1)
E: sales@martecltd.com.au | P: 02 8778 7500
www.martecaustralia.com.au
Qty 1x screw kit
Qty 1x remote control kit
Slope Ceiling up to 15°
Fg.2
Place circular shockproof
gasket above the hanger
bracket. Align the bracket
and screw the hanger
bracket to the ceiling tightly.
(See Fg.2)
Corrugated Ceiling
Fg.3
Place fan into hanger
bracket and align Ball Joint
Slot with hanger bracket as
illustrated.(See Fg.3)
Qty 3x blades
Apex Ceiling
Fg.4
After wiring is completed,
attach the canopy to the
hanger bracket by pushing
upwards and twisting anti-
clockwise. Tighten screws
and ensure canopy is not
touching the ball joint.
(See Fg.4)