Table of Contents
Advertisement
8.
Using Auto Play
1. Copy media content to the root directory of a USB Flash drive. USB Flash drive should be formatted as
FAT32.
2. Using the Poster remote control, press the Menu button.
3. Using the arrow buttons on the remote scroll to the right and select the Lock option.
4. Press OK to enter
Lock
5. When prompted enter user the remote to enter the password (default standard user password is "0000"
and super user is "2580")
6. Scroll down to Auto Play and change the option to On.
7. Press Exit to close Menu screen.
8. Plug the USB drive into the USB input of the Poster. Files will be copied to the Poster internal menory
automatically.
9. After the copying of files have completed, a "Please remove the USB disk" message will display. At this
point, it is safe to remove the USB drive. Playback of the copied content will automatically begin.
menu
Set Password
Set Password
Set Password
Monitor ID
Monitor ID
Monitor ID
Power Save
Power Save
Power Save
USB Auto Play
USB Auto Play
USB Auto Play
Slideshow interval
Slideshow interval
Slideshow interval
Burn-in Protection Interval
Burn-in Protection Interval
Burn-in Protection Interval
Set Password
Monitor ID
1
Power Save
1
1
Mode 1
USB Auto Play
Mode 1
Mode 1
On
Slideshow interval
On
On
5 Seconds
5 Seconds
Burn-in Protection Interval
5 Seconds
Off
Off
Off
Lock
Lock
Lock
Lock
16
1
Mode 1
On
5 Seconds
Off
Advertisement
Table of Contents
