Table of Contents
Advertisement
Open the door with the key.
NOTE:
1. Cut off power before opening
the door.
2. Make sure that the door is
locked before turning on power.
1. DP(DisplayPort) INPUT
Connect an external device to DP out jack.
2. HDMI1/2/3 Input
To connect with those equipments with HDMI or DVI interface.
HDMI 3(ARC): Connect an ARC-enabled home theater receiver to this jack.
3. USB 2.0
Connect USB devices to this port for Android.
NOTE:
It must be used if you upgrade software.
4.
TOUCH OUT1/2
Connect an external device to support touch control of the external device on the Poster.
NOTE:
Touch out 1 corresponds to the HDMI 1, Touch out 2 corresponds to the HDMI 2,HDMI3, DP or VGA.
5. PC IN
Enable connection to PC or other external devices with VGA/AUDIO ports.
6. S/PDIF digital audio output
Connect a digital sound system to this jack.
7.
Connect headphones to this jack. The Poster is the current audio output.
8. RS-232
For remote control, service and other uses.
9. RJ45 (LAN IN)
Enable connection to cable and log on to Internet.
10. AC OUT
Only use one power supply, ~100-240V 50Hz/60Hz, Current Max. : 0.65A.
11. AC IN
Plug the AC cord into this jack and into a power outlet.(~100-240V 50Hz/60Hz).
12. Power Switch
Push to (1) to connect the power, push to (O) to cut off.
NOTE:
Power switch can not be covered, and should keep the power switch can be conveniently operated.
Main board
10
11 12
3
Main
board
3
1
2
9
8
7
6
5
4
Advertisement
Table of Contents
