ViewSonic EP5542 User Manual page 24

The default password is
0000. The unit provides
a super password 2580.
Signal detection Select On to automatically recognition source.
OSD turn off Select OSD menu display time.
Data Display the date.
Time Display the current time.
Off Timer With Off Timer function On, the display will
automatically turn off at a preset time.
On Timer With On Timer function On, the
display will automatically turn on
at a preset source at a preset
time.
Highlight
Once, Everyday, Mon.~Fri.,
Boot on source Power on Source Setting, in Last input mode, when
the Poster powered on, it will automatically switch to
the source when it powered off last time. otherwise, it
is in setting mode.
No Signal Standby Set the time for no signal standby time.
HDMI EDID Version Select HDMI EDID Ver.
HDMI with One Wire Turn on/off enable HDMI_CEC.
HDMI ARC Turn on/off enable HDMI_ARC.
Set Password Password settings.
Monitor ID Set the ID number for controlling the display via the
RS232C connection.
Power Save Select Power off save mode.
Mode1: Press
Mode2: Press
Mode3: Press
USB Auto Play Set to ON, the display will copy media file from USB
storage to internal storage then to play the media file
automatically.
Slideshow interval Select slide show time.
Burn-in Protection Select Pixel shift time.
Interval
WOL Set to ON, the Poster is in off mode, LAN can wake
up and turn on the Poster.
Boot On Logo Turn on/off the first Power Logo.
Change Logo Select Change Logo item to access and change
Logo.
Note: 1. Save the logo which you are about to change
Factory reset Reset all settings to factory defaults.
15
Period
item, press
Mon.~Sat.
to put the poster in off mode.
to put the poster in standby mode.
to turn off backlight, press
to wake up the system. When the signal is
back, the system will be woken up.
in the USB stick. The logo file sizes should
be <512K, and rename it as bootanimation.
zip.
2. Insert the USB stick into the USB port on the
Android board.
or button to select
or Sat.~Sun..
again