Existing Construction – Accessible From Above; Existing Fan; No Existing Fan - Hunter Saturn 90052 Installation Manual

Existing Construction – accessible from above
C11
Remove an existing fan and check to make sure the
opening is large enough to accommodate the new
Cut out an opening for the housing.
C13
5/8
1/2
position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
028_41718_EngS_1.28.08_Arial.indd 11

EXISTING FAN

motor housing (8"x 8.5").
41718-01 01/28/2008

NO EXISTING FAN

OR
Use the motor housing as a template to mark position.
C12
Slide the mounting rails into brackets.
C14
5/8
1/2
Mark position of screws by using holes as a template.
11
E
D
1/28/08 10:47:30 AM