Troubleshooting The Appliance - Akai A58097 Instruction Manual

TROUBLESHOOTING THE APPLIANCE

PROBLEM
The unit will not
turn on/No power
The LED light effect
is not working.
No sound.
Sound is distorted.
The unit becomes
warm after
extended play at
high volume.
The microphone
is not working /
no sound on the
microphone.
There is an echo
when using the
microphone.
POSSIBLE CAUSE SOLUTION
Unit not plugged Connect the unit to an active mains socket.
in.
LED function Turn the LED effect on by pressing the Light
turned off. On/Off button on the remote control or the
unit's control panel.
Volume not Adjust the volume level using the Previous/
adjusted. Vol- and Next/Vol+ buttons on the unit's
control panel.
Wrong audio Select the correct audio source and function.
source or function
selected.
Source device not Turn the source device on.
turned on.
Unit not turned Turn the speaker on by pressing the On/Off
on. button on the remote control or the unit's
control panel.
Volume is set too Adjust the output volume using the Previous/
low. Vol- and Next/Vol+ buttons on the unit's
control panel.
Audio file is Press the Play/Pause button on the unit's
paused. control panel to resume playback.
Volume level is Adjust the output volume using the media
set too high. controls on the source device or the Previous/
Vol- and Next/Vol+ buttons on the unit's
control panel.
This is normal. Turn the unit off for some time or lower the
volume.
Microphone not Plug the microphone into the Mic jack on the
plugged in. unit's control panel.
Line-In mode not Select Line-In mode by pressing 'Line' on the
selected. remote control or the unit's control panel.
Microphone not Turn the microphone on by flicking the On/Off
turned on. switch on the handle to the On position.
Microphone Unmute the microphone by flicking the switch
muted. on the handle from the middle position to the
On position.
Echo level too Adjust the echo level by turning the 'Echo' dial
high. on the unit's control panel.
11