Using Your Appliance - Akai A58067 Instruction Manual

USING YOUR APPLIANCE

BEFORE FIRST USE: CHARGING
For best results, fully charge the unit
before use.
1. Connect the USB cable (included)
to the speaker's charging port, and
insert the other end into the USB port
on your computer or a similar power
source.
2. The LED indicator light on the front
of the speaker will turn red when the
battery is charging. Once it is fully
charged the Red LED will turn off. It
takes 3-4 hours to fully charge the
battery.
NOTE: In order to have better battery life,
please do not charge for over 4 hours.
Overcharging the speaker can adversely
impact the battery life.
NOTE: Turn the speaker off when it's not
in use to save battery power.
TURNING THE SPEAKER ON/OFF:
Press and hold the Power button for 3-5
seconds until you hear the indication tone.
The Blue LED light will then blink rapidly
indicating that your speaker is now ON
and is entering "pairing" mode.
Press and hold the Power button for 3-5
seconds to turn off the speaker.
SWITCHING TO BLUETOOTH PAIRING
MODE:
1. Turn on the speaker using the ON/
OFF switch.
2. The LED display will turn blue to
indicate the speaker is now in pairing
mode, and the blue LED light (at
the back of the speaker) will begin
blinking.
Note: The speaker will automatically pair
with previously paired devices.
6
PAIRING YOUR DEVICE VIA BLUETOOTH:
Your Bluetooth Speaker can wirelessly
stream audio from any Bluetooth enabled
device within 26-33 Feet. Simply follow the
below steps.
1. Turn on the speaker using the ON/
OFF switch.
2. The LED display will turn blue and
the Blue LED light (on the back of
the speaker) will begin blinking to
indicate the speaker is now in pairing
mode.
3. Activate the Bluetooth on your mobile
device or computer.
4. It will search for various devices.
5. Select 'A58067' to pair with the
speaker, and pair it with this device.
6. If required, enter the password '0000'
to confirm to finalise pairing.
7. Once it has successfully paired, you
will hear an indication tone and the
blue LED light (on the back of the
speaker) will stop blinking and stay
on.
8. If it fails to pair it within the time
frame or you want to pair it with a
new device; please follows the steps
outlined above.
9. Select your favourite song via your
Bluetooth device and music should
now stream through speaker.
CAUTION! This product is NOT a toy and
should not be played with in any manner.
WARNING! DO NOT throw the appliance.
It is NOT a ball and the weight of the
speaker could cause damage and/or
injury.
WARNING! After use, make sure to dry the
speaker with a damp cloth. If water has
entered the speaker grill, make sure to
turn the speaker upside down and empty
the water. Ensure that the speaker is dry
when charging or storing and not in use.