Menu Options - Hunter 42122 Owner's Manual

Features

Menu Options

Under your menu options you have the ability to reset your filter counter,
span settings, and temperature measurement. After making changes
to each menu option, the thermostat will show "Updated", save your
changes, and move you back to the home screen.
To access these options:
1. Press the
2. Once in the menu options list, use the
the menu items. The
item. To escape menu options, select a menu item by pressing
then press
3. RESET FILTER: If the filter indicator is flashing on the home screen you
can reset it here. Use the
. The screen will flash "Updated" and return to the home screen.
4. SPAN 1: The next menu option is to set your thermostats primary
span. Use the
Press , the screen will flash "Updated" and return to the home
screen. The span setting regulates when and how long your system
will run. The span has been set at the factory to 2 which will allow the
system to turn on1
run for 1 F (.05
O
16
button.
button will take you into the selected menu
again.
or
or buttons to adjust between 1, 2, or, 3 degrees.
F (.05 C) above or below the set temperature and
O O
C) above or below the set temperature.
O
44047-01 • 04/13/2010
6
or buttons to scroll through
buttons to select "Filter" and press
,