Energy Saving; Sleep Mode - Zenith HydroTap G5 User Manual

SECTION 3: Command Centre Screen

3.7 Energy saving

3.7.1 Sleep mode

• Disabled (default).
• Enabled: Any attempt to dispense water will bring the
HydroTap out of sleep mode. Allow sufficient time for
the water to reach the set temperature.
Sleep when...
Select from: It gets dark / Not used in 2 hours / Both
Recalibrate the light sensor after selecting sleep when "it
gets dark". Ensure the ambient light is typical for operating
conditions (see page 26).
806835NZ v1.05 03.22 G5 User guide
SLEEP WHEN
It gets
dark
Not used
in 2 hours
12:12 PM
31