Co2 Settings - Zenith HydroTap G5 User Manual

SECTION 3: Command Centre Screen

3.5.3 CO2 settings

Purge
CO2 purge
Purge the gas lines when fitting a new CO2 gas cylinder.
Press the green start icon. The purge runs for 30 seconds.
Water may be dispensed before CO2 gas escapes from the
tap. The purge process stops automatically.
This process removes water from the sparkling
chamber when a new CO2 bottle is installed.
This is an automatic process that will take 30 seconds.
CO2 reset
After fitting a new CO2 cylinder, reset the CO2 counter.
24
CO2 SETTINGS
CO2
PURGE WATER WITH CO2
CO2
Reset
INFO
806835NZ v1.05 03.22 G5 User guide
12:12 PM
CO2
Life
12:12 PM