Advertisement
SECTION 1:
ASSEMBLY
Enclosed are bags of rocks, one factory installed 10' propane-
rated hose with attached regulator, one propane tank stabilizer
ring, one cover.
STEP 1
Remove the plastic bags containing the rocks and propane
stabilizer ring, deploy the appliance and set aside the cover.
STEP 2
Open the bags of rocks and arrange the rocks in burner area.
Select larger sized rocks and arrange on top of the mid-sized rocks.
Our preferred configuration is
pictured here.
Never handle rocks which have
not been allowed to cool from
exposure to flame. Never attempt
to rearrange rocks while unit is
ignited.
STEP 3
The other bag of rocks is included as spares and labelled "Spare
Rocks". These can be stored and used as replacements.
NOTE: Rocks are not to exceed a maximum weight of 4.8 kg or
10.6 lbs.
STEP 4
Your included Cover is to be used
for storage and transportation as
shown.
• Never use the cover to
extinguish the flame on your
Outland Firebowl
.
®
En-5
OUTLAND FIREBOWL
Owner & Safety Manual
OKANAGAN - OWNER & SAFETY MANUAL
®
WARNING:
Never use the cover on your Outland Firebowl while the
Firebowl burner is in operation. After use allow the Firebowl to
cool for at least 30 minutes prior to deploying the cover.
NOTE TO USER:
Before igniting the unit for the first time, follow steps 1
through 5 in the below Ignition section.
D.875.000.V0
Advertisement
