Advertisement
Fixing the removable handles (Ø 24 / Ø 28 cm)
Handle assembly information: Before you can attach the handle, first remove the protective cover from the
metal sleeve. To avoid the possibility of any damage, pull the protective cover back onto the metal sleeve after it
has fully cooled. Please note that the protective cover must be removed every time before use, and is therefore
not suitable for use in the oven.
Info
To attach the removable handle, pull the slider in your direction (away from the pan), then hold the handle at
the same angle as the adapter and slide the handle over it. When the upper edges sit next to each other, press
the handle lightly downwards and release pressure on the slider – the handle is now fixed in position. To remove
the handle please proceed in reverse order.
Caution!
Should the metallic sleeve or the handle adapter loosen, tighten the inside screw with light pressure. Do not
use force, it can damage the threads.
Do not use pans with a loose handles – they can cause injury!
Slider
Handle adapter
Metallic sleeve
5
Advertisement
