Genius Speed Slicer Plus Quick Use Manual

Quick Use Guide

Blade Protector

To remove the V-Blade Protector before using the slicer, simply lower the

cutting platform to number 4. Place forefinger in circle of blade protector and

gently slide back until the protector is clear from blade. Use caution as the

blades are very sharp. For safe storage, place the guard back on blade and

gently pull protector back in place. Make sure to raise the cutting platform to

lock.

*Tip: Occasionally, shake or move the food to the back of the container to

avoid food backup!

Your Speed Slicer Plus comes with a handy easy slice stand for counter top or

cutting board slicing. To use, insert both ends of the stand into the two holes

underneath the machine on the handle side and push all the way in. To remove,

place the Speed Slicer upside down on your counter and gently pull up until it

releases from the machine.

Your Speed Slicer Plus comes with a convenient 14

cup clear food/storage container and locking stay

fresh lid. You can prepare your foods directly into

the container by placing the front of your Speed

Slicer Plus on the front of the container and rest the

handle side on the back of the container. Always

hold the grip handle with one hand while cutting.

PLEASE BE VERY CAREFUL

WHEN HANDLING THE

SPEED SLICER PLUS!

BLADES ARE VERY SHARP!

Table of Contents

Do you have a question about the Speed Slicer Plus and is the answer not in the manual?

Page 1 Easy Slice Stand Your Speed Slicer Plus comes with a handy easy slice stand for counter top or cutting board slicing. To use, insert both ends of the stand into the two holes underneath the machine on the handle side and push all the way in. To remove, place the Speed Slicer upside down on your counter and gently pull up until it releases from the machine.
Page 2 Handy Grip: Handy Grip was designed for easy and safe cutting with the Speed Slicer Plus. It has five stainless steel pins to firmly grip foods and a food plunger for easy and total food preparation Lay the food to be cut on the cutting platform.
Page 3 Handy Hopper Hold the grip handle and slide the Handy Hopper onto the slicer by putting the runners into the grooves on the side. The hopper should slide easily in the rails and stop at the end. Now the food can loaded into the container.