Advertisement
Caution!
Before fitting the handle, remove the protective cover from the screw-fix element on the side of the pan.
„
During fitting, take special care to see that the screw screws in easily. If this is not the case, then the
„
screw is sitting at an angle to the thread. Screw out the screw and re-enter making sure the screw is
aligned with the thread. Never use force. Screws entered with force can lead to damage to the internal
thread and the handle can never be fixed in position again.
Do not use a pan with a loose handle – certain danger of injury!
„
Assembly
Before you can use your Cerafit Fusion pan for the first time you have to fix the handle to the pan (Ø 20 cm)
and the knob onto the glass lid. The handles are numbered to match the pans. Before you fix them, please
ensure that you have selected the right handle. The knobs also have screws with matching lengths, which have
to be used just for that particular lid. Unless you use the correct screws, you will not be able to fix the knobs
and handles.
Follow the instructions below:
List of materials for fixing the handles on the ceramic pan (Ø 20 cm)
Pan
Ceramic pan (20 cm)
Fixing the handle
4
Handle
Not removable, Number 20
Spring ring
Spring ring
Screw
1 x
1 x 18 mm
Advertisement
