Table of Contents
Advertisement
5 Disassembly and Assembly Instructions
5.1 Outline
Proceed disassemble and assemble, by referring the following table Fig. 5-1.
Important:
1. It is recommended dealing with Clean box, to keep maintaining the dustproof environment.
(Refer to "4.2. Clean Box" section of this service manual for detailes.)
2. To minimize the possibilities/risk of getting the dust/dirt on the lens surface, keep covering the lens unit with lens caps (front &
rear), other than necessary cases.
3. Do not touch the surface of the lens glasses with your fngers.
4. Blow off the dust on the surface of the lens with a blower brush.
5. Use lens cleaning KIT (BK)(VFK1900BK).
NOTE:
1. When tightening screws, use a torque driver (RFKZ0456) with specifed torque mentioned in each step.
file:///C|/U...l/Temp/Rar$EXa0.749/viewing/SGML_VIEW_DATA/ALL/H-PS14042PP/SVC/DSC1110056CE/doc/DSC1110056CE_05.xml[11/12/2018 3:55:27 PM]
Fig. 5-1
Advertisement
Table of Contents
