Advertisement
V
ECTOR
5.3 Set Time Schedules
Overview
Up to 12 time and weekday programs or annual holidays can be programmed (Pr01 to Pr12).
5.3.1 Time schedule enable/disable
Overview
This section describes how to generally enable/disable timed events (schedules) on a X2 device.
Procedure
1.
Press the (
) button longer than 2 seconds.
➔ SEL and the actual Date and Time are displayed alternatingly.
2.
Press the ( ) button briefly to go to the scheduler submenu.
➔ PRO and SEL is displayed.
3.
Press the (
) button: Schedule status indicates whether it is OFF or
ON.
Press the (
) button to change the status.
➔ When schedule is ON,
Press the (
) button (1x) to go back to the previous submenu.
5.3.2 Set daily / weekly time schedules
Overview
This section describes how to set a daily, weekly repeated action/function.
Up to 12 time and weekday programs can be programmed (Pr01 to Pr12).
Requirements
Time schedule is enabled (see chapter 5.3.1).
Procedure
1.
Press the (
) button longer than 2 seconds.
➔ SEL and the actual Date and Time are displayed alternatingly.
2.
Press the ( ) button briefly to go to the scheduler submenu.
➔ PRO and SEL is displayed.
3.
Press the (
) button: Schedule status indicates whether it is OFF or
ON.
4.
Press the (
) button to change the status.
➔ When scheduler is ON,
5.
Press the ( ) or ( ) button to select between programs
Pr 01...Pr 12.
Doc: 70-00-0951A, Serie X2, 20211220
subjects to alteration
is displayed.
is displayed.
© Vector Controls GmbH, Schweiz
www.vectorcontrols.com
X2-O
M
PERATIONS
T
D
ANUAL
OUCH
ISPLAY
Page 9-16
Advertisement
