Board Operation; Calibration; Adjustment; Toolbar - 2x3 ESPRIT plus Manual

6. Board operation

Once the application is installed select the esprit plus service, and an
should become apparent at the bottom-right corner. The former indicates that the touch
screen has not been connected properly to the computer and the USB cable should
be reconnected. The later indicates correct installation and readiness.
Right click on
A list of available options is here:

6.1 Calibration

If the projected area does not cover the indicated area, the mouse position should be calibrates
Once you click on Calibration, six reference points will appear on the projection area. Each time the
point is displayed click with the mouse pointer on it, and the system will recalibrate the
reference parameters, so new calibration will not be necessary with the next start of the
system.

6.2 Adjustment

If the mouse pointer does not match the position of the hand pointer, click on the „Adjust"
until they overlap. Some models have a number of buttons outside the projection area, that
can be activated with clicks.

6.3 Toolbar

The toolbar features intuitive icons (described at the 6.4) that simplify operation of the board. The
toolbar can be placed at any spot on the board to facilitate operation of both right and left hand
users.
folded toolbar
14
shall open the popup menu.
unfolded toolbar
or
the toolbar after
a function is selected
icon