Software Installation (4 Steps) - 2x3 ESPRIT plus Manual

5.2 Software installation (4 steps)

Once you insert the CD in the drive the installation should proceed automatically.
Otherwise:
1. Run the ésprit.exe file you shall find in the root folder of the software medium.
2. Once software is installed, connect the board to the computer with the USB cable and wait until
the system detects new device.
3. ésprit+ Services– for launching of the service controlling communication of the board with the
computer. The icon showing the connection status should be visible at the right side of the toolbar.
Right click on the icon will reveal calibration function and adjustments.
4. Once the system is calibrated and adjusted, the board is ready for operation with
the computer.
ésprit+ menu includes also:
ésprit+ software for board control, responding to the buttons on the board.
UnInstall– removes the ésprit+ software.
Notes:
Connect the board to the computer with an USB cable before installation of the
USB driver.
13