Advertisement
5. Car Chair
Connect the batteries before installing the car chair. The hook of the seat should be aligned
in the slot, then tighten the fixing holes on both sides and the front of the seat with screws
turning clockwise. Insert the charger into the charging hole for charging. Do not operate the
car while charging.
6. Adding Batteries to the Remote Control
Remove the screw on the battery cover with a screwdriver and then remove the battery
cover, insert the 2 AAA 1.5V batteries. It needs to match the frequency to control the car.
Refer to the remote control section of this user guide for pairing instructions.
Advertisement
