Mitsubishi Electric MSZ-GL06NA Operating Instructions Manual page 8

● OPERATING INSTRUCTIONS ●
F
AN SPEED AND AIRFLOW DIRECTION ADJUSTMENT
Fan speed
1
Press to select fan speed. Each press changes
fan speed in the following order:
(AUTO) (Quiet) (Low)
• Two short beeps are heard from the indoor unit when set to AUTO.
• Use higher fan speed to cool/heat the room quicker. It is recommended
to lower the fan speed once the room is cool/warm.
• Use lower fan speed for quiet operation.
Note:
Multi system operation
When several indoor units are operated simultaneously for heating operation, the tem-
perature of the airfl ow may be low. In this case, it is recommended to set the fan speed
to AUTO.
Up-down Airflow direction
1
Press to select airfl ow direction. Each press
changes airfl ow direction in the following order:
(AUTO) (1) (2)
• Two short beeps are heard from the indoor unit when set to AUTO.
(AUTO) .......... The vane is set to the most effi cient airfl ow direction. COOL/DRY/
FAN:horizontal position. HEAT:position (5).
(Manual)......... For efficient air conditioning, select the upward position for COOL/
DRY, and the downward position for HEAT/FAN. If the position (4) or
(5) is selected during COOL/DRY, the vane automatically moves to
the upward position after 0.5 to 1 hour to prevent any condensation
from dripping.
(Swing)........... The vane moves up and down intermittently.
En-7
(Med.) (High) (Super High)
(3) (4) (5) (SWING)
Left-right Airflow direction
I To change the horizontal airfl ow direction.
Move the vertical vane manually before starting operation.