Alarm Clock Setting; Snooze Function - Raddy WF-60C User Manual

ALARM CLOCK SETTING

1.
Check the Set Alarm Time: In standard mode, short press the
【ALARM】button to check the set alarm time. It will return to normal
time display mode if no operation in 5 seconds.
Turn On/Off the Alarm Clock: In standard mode, short press the
2.
【ALARM】button and the LCD will display the set alarm time. If there's
an alarm icon beside the alarm time, the alarm is on. If there's no alarm
icon, the alarm is off. Press the【ALARM】button again can turn on/off
the alarm. It will save your setting and return to normal time display
mode if no operation in 5 seconds.
3.
Set Daily Alarm Clock:
①
Press and hold the【ALARM】button to enter the Alarm Clock
Setting Mode. The Hour starts to flash. Use the【+/RCC】and【-】
buttons to set the correct hour.
②
Short press the【ALARM】button, the Hour will be saved and the
Minute starts to flash. Use the【+/RCC】and【-】buttons to set
the correct minute.
③
Short press the【ALARM】button again, the alarm clock will be
saved.
*Press and hold【+/RCC】and【-】buttons will quickly change the
value by 8 steps.
*If the alarm clock can't be set, check if the base station is in RCC
Receiving Mode and exit back to standard mode by long pressing the
【+/RCC】button.

SNOOZE FUNCTION

1.
When the alarm is ringing, press any button except the【SNOOZE/
LIGHT】button can stop the alarm for the day. And the alarm will restart
the next day. The alarm sound will last for 2 minutes if no button is
pressed.
WF-60C WEATHER STATION
13