CallerID Whozz Calling Basic POS 2 Product Manual page 7

Inbound/Outbound
and Start/End of Checksum
call Indicators. Indicator
(Always I and S G (Good)
for Basic units) or B (Bad)
02 I S 0000 G A0 09/26 01:28 AM 770-263-7111
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4
Line Duration
Number of call in
seconds
(always
zero for
Basic units)
Note: No dashes are inserted in phone number when unit set to UK-BT/ETSI type Caller ID signaling (DIP #4 up).
Date Field
(Month, Day)
leading zeroes
are sent as spaces
02 9/26
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2
1
Line Number
NOTE: All fields right
Fig. 3a CallerID.com Format
Date Field
(Month, Day)
Leading zeroes
are displayed.
Type of Time including
ring and AM/PM Indicator.
# of rings. Leading zeroes
(always are included.
"A0"for
Basis units)
Fig. 3b TCI Format
Phone number field - 14 characters.
Unlike CallerID.com format, the phone
number is right justified.
Private & Out-of-Area sent in number field.
11:28 AM
2 3
Time
including
AM/PM
Indicator
justified. 5 spaces separate each field except number and name fields.
(DIP Switch #3 set OFF)
Phone Number field - 14 characters.
The text, "Private" or "Out-of-Area"
can be displayed in Number Field.
(DIP switch #3 set ON)
770-263-7111
4
5
CALLERID.COM
Name field - 15 characters. Padded with
spaces if name less than 15 characters
(Caller ID Name not always available)
Name field - 15 characters, Right
justified. (Name sent in most areas).
Private & Out-of-Area codes are not
shown in name field.
CALLERID.COM
5 6
11 Spaces
separate
these fields
If Serial Output,
Carriage Return
and Line Feed
terminate string
C L
F
R
C L
R F
7
Carriage Return
& Line Feed
2 Characters