Subscribe to Our Youtube Channel
Related Manuals for CallerID Whozz Calling Basic POS 2
Summary of Contents for CallerID Whozz Calling Basic POS 2
- Page 1 Whozz Calling? Basic POS 2 Basic POS Caller ID Caller ID Unit Product Manual Revision 3.2 -01/05/2021 (SMT Versions)
- Page 2 Whozz Calling? Basic POS 2 Product Manual [SMT V3.2 - 01/05/2021]...
- Page 3 If you unit connects via Ethernet cable, plug it into any switch or router on your Local Area Network. Use the Ethernet Configuration Tool located at www.CallerID.com/Downloads/Diagnostic-Tools/ to set the unit to a static IP address within your IP scheme and outside any DHCP range. Refer to the Ethernet Supplement for more details.
-
Page 6: Dip Switch Settings
DIP Switch #2 9600 1200 OUTPUT FORMAT The unit can deliver either the CallerID.com Whozz Calling? format or the alternative TCI format. DIP switch number 3 control the unit output format. Refer to the table below and Fig 3. Format CallerID.com Unless the popup application you are using has only integrated the TCI format, the CallerID.com format is... - Page 7 (DIP switch #3 set ON) Phone number field - 14 characters. Name field - 15 characters, Right Date Field Unlike CallerID.com format, the phone justified. (Name sent in most areas). (Month, Day) number is right justified. Private & Out-of-Area codes are not leading zeroes Private &...
-
Page 8: Connecting To The Computer
Raw data results are seen in top window and formatted phone records in the bottom window c. A “No-CallerID” response means the unit could not capture a Caller ID signal; usually the result of: - No Caller ID service on the phone line. -
Page 9: Specifications
Info@CallerID.com Warranty Information CallerID.com will repair this product with new or rebuilt parts, free of charge, when returned postage prepaid to the CallerID.com repair facility in Norcross, GA within 1 year from the date of original purchase. This warranty is extended only to the original purchaser. A purchase receipt or other acceptable proof of purchase date will be required before warranty service is rendered. - Page 10 Appendix - RS232 Pin Outs When the serial port is configured to “No Flow Control”, only Transmit and Ground connections are required. Pin 7 and Pin 8 need to be connected only if other serial flow control types are selected. Computer DB9/M Serial Port Monitoring Unit DB9/F Pin 1 (Carrier Detect)
- Page 11 Caller .com 5680 Oakbrook Parkway, #150, Norcross, GA 30071 800.240.4637 770.263.7111...
Need help?
Do you have a question about the Whozz Calling Basic POS 2 and is the answer not in the manual?
Questions and answers