Klarstein 10034880 Manual page 27

Built-in electric oven
Hide thumbs Also See for 10034880:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
Notes on electrical connection
• The device is designed for fixed installation with a three-pole mains cable and
may only be connected by an authorised specialist in accordance with the wiring
diagram.
• Only a qualified electrician who complies with the relevant regulations may replace
the mains cable.
• Do not use multiple plugs, socket strips or extensions, as overloading can lead to a
fire hazard.
• If the connection is no longer accessible after installation, an all-pole disconnector
with a contact opening of at least 3 mm is required.
Wiring
Green-Yellow
Earth wire (E)
Blue
Neutral wire (N)
Brown
Live wire (L)
Note for Great Britain: Do not connect the device with a 13 A plug and do not
protect it with a 13 A fuse. The device must be protected with a fuse of 16 A or more.
The unit must be disconnected from the mains supply for all installation work. During
the installation of the device, protection against accidental contact must be provided.
Basic installation instructions
• Observe the specified installation dimensions exactly.
• To achieve optimum integration into the kitchen unit, install the oven in a standard
600 mm wide cabinet so that it is flush with the front of the cabinet.
• Do not hold the stove by the stove door when installing.
EN
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

10034881

Table of Contents