Connecting Cable Or Satellite With A Set-Top Box - HP PL4270N User Manual

3
Connect power to the TV; see "Connecting power
to the TV" on page 18.
4
Turn on the TV; see "Turning the TV On and Off"
on page 19.
5
Select the input source to view, as well as the
Picture mode, Aspect, and other options; see
"Operating the TV" on page 21.
Connecting cable or satellite
with a set-top box
Connecting your TV directly to the audio and video
output of your set-top box ensures a more vivid picture
and enhances your viewing enjoyment. See "Choosing
the AV connection to use" on page 9 for connector
and cable information.
Optional equipment and all cables are sold separately.
You can connect a digital TV set-top box (air or cable),
and other AV equipment, by using a connector set from
one of the following inputs:
Digital High-Definition Input: Connect an
■
HDMI cable from the digital, high-definition cable
or satellite set-top box to any of the HDMI
connectors.
Or
Connect a DVI-D cable and DVI-to-HDMI converter
from the digital, high-definition cable or satellite
set-top box with a DVI connector to HDMI 1, and
left-right audio cables to HDMI Audio In L and R.
HDMI supports 480i, 480p, 720p, 1080i, and
1080p input formats. The TV automatically
determines what has been connected. Some set-
top boxes must be set for a specific resolution out.
n
HP Plasma TVs support 1080p input over
HDMI; however, due to the lower native
resolution of the 42-inch TV, the preferred
modes of operation for that TV are either
1080i or 720p.
The HDMI connectors are:
HDMI 1 with HDMI Audio In L and R
■
HDMI 2
■
HDMI 3 (select models only)
■
High-Definition Input: Connect component
■
video cables and left-right audio cables from the
high-definition cable or satellite set-top box.
Component supports 480i, 480p, 720p, and
1080i input formats. The TV automatically
determines what has been connected. Some set-
top boxes must be set for a specific output
resolution.
The Component connectors are:
1: Component In Y, Pb, and Pr, and Audio In
■
L and R
2: Component In Y, Pb, and Pr, and Audio In
■
L and R
Standard Definition Input: Connect an
■
S-Video cable, or a composite video cable, and
left-right audio cables from the cable or satellite
set-top box. (Audio In L and R connectors are
shared within the AV connector set.)
The AV connectors are:
AV1: S-Video In, Video In, and Audio In
■
L and R
AV2: S-Video In, Video In, and Audio In
■
L and R
11
Setting Up the TV