HP MR4000N User Manual

Hewlett-packard hdtv tuner user's guide.
Hide thumbs

Advertisement

HP MR4000N HDTV Tuner
User's Guide
Regulatory model: HSTND-3X01

Advertisement

   Also See for HP MR4000N

   Related Manuals for HP MR4000N

   Summary of Contents for HP MR4000N

  • Page 1

    HP MR4000N HDTV Tuner User’s Guide Regulatory model: HSTND-3X01...

  • Page 2

    © 2004 Hewlett-Packard Development Company, L.P. All rights reserved. HP supports lawful use of technology and does not endorse or encourage the use of our products for purposes other than those permitted by copyright law. WARNING: Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.

  • Page 3: Important Safeguards

    Important Safeguards WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE UNINSULATED “DANGEROUS VOLTAGE”...

  • Page 4: Important Safety Instructions

    Important Safety Instructions • All operating and use instructions should be followed. • All warnings on the appliance and in the operating instructions should be adhered to. • The safety and operating instructions should be retained for future reference. • All the safety and operating instructions should be read before the appliance is operated.

  • Page 5

    Nonuse Periods — The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. Object and Liquid Entry — Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

  • Page 7: Table Of Contents

    Connecting to an analog TV (composite) ...7 Connecting a splitter for Picture-In-Picture TVs ...7 Connecting audio equipment ...7 Using the HP HDTV Tuner ... 8 Front Panel Controls ...8 Using the Remote Control ...9 Identifying the remote control buttons ...9 Installing or replacing the remote control batteries ...10...

  • Page 8: Table Of Contents

    Using the Lock Menu ... 16 Using the Setup Menu ... 18 Screen format... 18 4:3 ratio... 18 16:9 ratio... 19 Time... 19 Sound ... 20 Video noise reduction (analog channels only) ... 21 Electronic Program Guide (EPG) (digital channels only) ... 21 Troubleshooting...22 Specifications ...23 General Specifications...

  • Page 9: Safety

    Tuner to rain or moisture. • Install the HP HDTV Tuner on a flat surface to avoid tipping. Leave some distance between the back of the HDTV Tuner and the wall for proper ventilation. Never install the unit where the ventilation on the top of the HDTV Tuner is covered.

  • Page 10

    If you are not sure of the type of power source required, consult your HP authorized service provider or local power company. Overloading: Do not overload an electrical outlet, power strip, or convenience receptacle. The overall system load must not exceed 80% of the power strip input rating.

  • Page 11: Introduction, What's In The Box

    Introduction The HP High-Definition Tuner receives digital high-definition and standard definition ATSC broadcasts right off of the air. A digital on-screen guide enables you to conveniently locate your favorite shows using an intuitive interface. DVI output enables the transmission of pure digital signal for the best picture available today.

  • Page 12: Setup, Rear Panel Connectors

    Setup Rear Panel Connectors RF Input (labeled AIR 75 ohm) Connect an outdoor or indoor antenna. Monitor Out Connect composite cables to your TV or monitor. Insert the yellow video cable into the Video connector and the white and red cables into the Audio L and R connectors, respectively. Component Out Connect component cables to your TV or monitor.

  • Page 13: Identifying Your Component's Cables

    DTV Out Select (YPbPr/DVI) • Use YPbPr when you use the component connectors to a TV, monitor, or other video component input. This is compatible with resolution settings 1080i, 720p, and 480p. • Use DVI when you use the DVI connector to a TV, monitor, or other video component input. This is compatible with resolution settings 1080i, 720p, and 480p.

  • Page 14: Connecting The Hp Hdtv Tuner, Connecting An Indoor/outdoor Antenna

    VHF/UHF signals, you need a combiner (not included). NOTE: The HP HDTV Tuner is able to receive DTV and analog signals from your local cable provider when transmitted in the 8VSB modulation format approved by the FCC for DTV transmission.

  • Page 15: Connecting To An Analog Tv (composite), Connecting A Splitter For Picture-in-picture Tvs, Connecting Audio Equipment

    Connecting to an analog TV (composite) 1 Connect your indoor or outdoor antenna to the RF Input (labeled AIR 75 ohm). 2 Insert the yellow cable into the Video connector in the Monitor Out section. 3 Insert the white and red audio cables into the L and R Audio connectors of the Monitor Out section. 4 Insert the other end of the yellow cable into the Composite In connector of your TV.

  • Page 16: Using The Hp Hdtv Tuner, Front Panel Controls

    Using the HP HDTV Tuner Front Panel Controls • Power button: Press to turn the power on and off. • Menu button: Press to display the On-Screen Menu. • Power LED: A red light appears when the power is on.

  • Page 17: Using The Remote Control, Identifying The Remote Control Buttons

    Press the Still button to pause a frame. The audio continues. Press Still again to undo the image pause. Signal Press the Signal button to view the signal strength or weakness of the current channel. Using the HP HDTV Tuner...

  • Page 18: Installing Or Replacing The Remote Control Batteries, Using The Electronic Program Guide (epg)

    Current Guide: Displays programs that are currently on air. All Guide: Displays the same information as the Current Guide, plus a schedule of future programs. For information on changing between Current Guide and All Guide, see “Electronic Program Guide (EPG)” on page 21. Using the HP HDTV Tuner...

  • Page 19: Using The On-screen Menu, Using The Main Menu

    TV rating or MPAA rating of the program. Using the On-Screen Menu The On-Screen Menu (OSM) provides an easy way to customize your HP HDTV Tuner. Use it to customize channels, enable captioning, adjust screen format, and sound. NOTE: When 1080i, 720p, or 480p (DTV) is selected with the Resolution Select switch on the rear panel, the OSM and Electronic Program Guide are not supported for Monitor Out (composite).

  • Page 20: Using The Channel Menu, Using Auto Memorizing To Set Up Your Channels, Programming Favorite Channels

    Follow these steps to add and delete channels: 1 Press the Menu button on your remote control. 2 Highlight Channel, and press the Select button. 3 Highlight Channel Add/Delete, and press the Select button. Using the HP HDTV Tuner...

  • Page 21: Fine Tuning Channels

    2 Highlight Channel, and press the Select button. 3 Highlight Fine Tune Channel, and press the Select button. 4 Highlight Manual, and press the Select button. 5 Use the Up and Down arrows on your remote control to adjust the tuning. Using the HP HDTV Tuner...

  • Page 22: Adjusting The Signal Strength, Using The Caption Menu, Turning Captions On And Off, Analog Mode

    2 Highlight Caption, and press the Select button. 3 Highlight Analog Mode, and press the Select button. 4 Use the Up and Down arrow buttons on the remote control to highlight an analog mode, and press the Select button. Using the HP HDTV Tuner...

  • Page 23: Digital Service, Digital Service Info

    Digital service info The Digital Service Info screen displays the language assigned to each service. When “Yes” appears in the Easy Reader column, it indicates the captions have been edited to an easier reading level. Using the HP HDTV Tuner...

  • Page 24: Digital Service Font, Using The Lock Menu

    3 Use the remote control number keys to enter a PIN. If this is your first time using this feature, enter the default password, 0, 0, 0, 0, to gain access. 4 To create your own PIN, highlight Changing PIN, and press the Select button. Using the HP HDTV Tuner...

  • Page 25

    TV-Y: All children. The themes and elements in this program are specifically designed for a very young audience, including children from ages two to six. TV (FCC) subcategories for content V: Violence. S: Sexual content. L: Offensive language. D: Dialogue (sexual innuendo). FV: Fantasy or cartoon violence. Using the HP HDTV Tuner...

  • Page 26: Using The Setup Menu, Screen Format, Ratio

    Electronic Program Guide (EPG). Screen format Your screen format options depend on the type of TV or monitor you are using with your HP HDTV Tuner. Follow these steps to change your screen format: 1 Press the Menu button on your remote control.

  • Page 27: Ratio, Time

    2 Highlight Time, and press the Select button. 3 Highlight Time Zone, and press the Select button. 4 Use the arrow buttons to highlight the time zone you live in, and press the Select button. Using the HP HDTV Tuner...

  • Page 28: Sound

    4 Highlight Digital Output, and press the Select button. 5 Use the arrow buttons to highlight Dolby Digital (not available with analog broadcasts) or PCM, and press the Select button. 6 Press the Exit button to return to your current channel. Using the HP HDTV Tuner...

  • Page 29: Video Noise Reduction (analog Channels Only), Electronic Program Guide (epg) (digital Channels Only)

    3 Highlight Program Guide Setting, and press the Select button. 4 Use the arrow buttons to highlight Current Guide or All Guide, and press the Select button. 5 Press the Exit button to return to your current channel. Using the HP HDTV Tuner...

  • Page 30: Troubleshooting

    Troubleshooting Problem The HP HDTV Tuner is not receiving power and the Power LED on the front does not light up. There is no picture or sound. There is no picture, but there is sound. There is a picture, but there is no sound.

  • Page 31: Specifications, General Specifications, Rf Specifications

    Specifications General Specifications Broadcasting Standard Power Requirement Power Consumption Dimensions (W x D x H) Weight RF Specifications Tuning System Type Band Coverage Antenna Number of Inputs/outputs Digital TV (ATSC), analog TV (NTSC) 120V , 60 Hz 20W (standby 1.5W) 35.8 ×...

  • Page 32: Agency Regulatory Notice, Federal Communications Commission Notice, Modifications, Cables

    Agency Regulatory Notice Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 33: Index

    7 connecting analog TV, 7 audio equipment, 7 component connector (YPbPr), 6 composite connector, 7 HP HDTV Tuner, 6 indoor/outdoor antenna, 6 digital audio out, 4 digital language, 20 digital output, 20 digital service, 15 digital service font, 16...

  • Page 34

    noise reduction, 21 On-Screen Menu using, 11–21 parental locks, 17 ratings, 16 rear panel connectors, 4 remote control buttons, 9 replacing batteries, 10 using, 9 resolution select, 4 RF input, 4 Index safety, 1–2 precautions, 2 screen format, 18 setup menu, 18 signal strength, 14 sound, 20 specifications...

  • Page 35

    Index...

This manual also for:

Pl4260n - 42" plasma tv

Comments to this Manuals

Symbols: 0
Latest comments: