Advertisement
Available languages
Available languages
B e f o r e U s e -Disassembly and assembly of the parts-
•
The fo llo w in g ste p s show how to de tach / a tta ch a tta ch m e n ts, using the ju ic e a tta c h m e n t as
an exam ple.
The frozen cone can be detached / attached in the same method.
To d is a s s e m b le
1
Remove the
juicing bowl
from the motor
housing.
2
Remove the juice attachment.
•
Squeezing screw comes out with it.
Squeezing
screw
3
Remove the parts.
Juice cone
Rotating
brush
GB12
D is a s s e m b lin g / A s s e m b lin g a tta c h m e n ts
1
•
•
•
See page GB20 for how to install the
gasket, rubber plug and rubber brushes.
•
Make sure the gasket, rubber
plug and rubber brushes are
in place correctly.
Gasket is located in the juicing bowl.
Top view
Rubber plug is located on the outer
bottom.
Push it in until
y o j ) /
no gap.
Outer bottom view
Rubber brushes are located at side
o f the rotating brush.
The juicer may not work properly if
they are not assem bled correctly.
Advertisement
