Toro Groundsmaster 4500-D Installation Instructions Manual page 6

Installing the Filter Tube and the
Divider Tube
1. Align the tube nut for the hydraulic-filter tube to
the fitting in the cross-manifold tube as shown
in Figure 7.
1. Divider tube (flow divider
fitting)
2. Hydraulic-filter tube (filter
base fitting)
3. Flow divider
4. Cross-manifold tube
2. Thread the tube nut for the hydraulic-filter tube
onto the fitting in the cross-manifold tube, and
tighten the nut to 51 to 63 N⋅m (37 to 47 ft-lb).
3. Align the tube nuts for the divider tube to the
fittings in the cross-manifold tube and the flow
divider (Figure 7).
4. Thread the tube nuts for the divider tube onto
the fittings in the cross-manifold tube and the
flow divider, and tight the nuts to 116 to 142 N⋅m
(85 to 105 ft-lb).
Figure 7
5. Divider tube
(cross-manifold tube
fitting)
6. Hydraulic-filter tube
(cross-manifold tube
fitting)
7. Forward
Installing the Traction-motor Tube
1. Align the tube nuts for the traction-motor tube
to the fittings in the traction motor and the flow
divider (Figure
g021299
1. Traction motor
2. T-fitting
3. Traction-motor tube
(traction-motor fitting)
2. Thread the tube nuts for the traction-motor tube
onto the fittings in the traction motor and the
flow divider, and tighten the nuts to 116 to 142
N⋅m (85 to 105 ft-lb).
6
8).
Figure 8
4. Traction-motor tube
(flow-divider fitting)
5. Flow divider
6. Forward
g021298