Location Of Safety Labels - S&C PureWave SMS-250 Installation Manual

Safety Information

Location of Safety Labels

A
A
Reorder Information for Safety Labels
Location Safety Alert Message
A
DANGER
NOTICE
B
●
C
DANGER
● Label is on the left and right sides of the PCS enclosure .
Symbols and Terminal Markings
The " " symbol represents the power on button . When the button with the " " symbol is pressed, the breaker
places the equipment into a fully-powered state .
Equipment grounding conductor .
The " " symbol represents the power off button . When the button with the "
connects the load side from the power source . The ac breaker disconnects the ac output to theload . A dc breaker
to disconnect the PureWave SMS-250 from the battery is not included in the equipment and must be considered
in the system design .
Direct current, also indicated as dc .
Alternating current, also indicated as ac .
4
S&C Instruction Sheet 659-555
KEEP OUT . RISK OF ELECTRICAL SHOCK ...
REAR CLEARANCE ...
ARC FLASH AND SHOCK ...
A
B
Description
" symbol is pressed, the breaker dis-
C
C
C
C
Part Number
PE-70479-1
PE-70482-1
PE-70483-1