10
3.
When using the supplied in-line fuse holder
(which must be used if not connecting to
vehicle's fuse panel):
a.
Ensure the fuse holder contains a 5A UL
Listed slow-blow fuse.
b.
Splice the fuse holder to the end of the red V+
wire, as shown below. Make the distance
from the fuse to the power connection point
as short as possible.
Ground Wire (black)
5A Fuse and Fuse Holder
4.
Prepare the cable termination.
a.
Red wire: connect to a +12 or 24 VDC vehicle
power source.
b.
Black wire and Shield wire: connect to vehicle
ground wire or chassis ground.
VCD9500/VBC9500
Shield Wire (bare wire)
V+ Power (red)