Main Fuse - Honda Motorcycle Owner's Manual

Main fuse:

The main fuse (1) is located on the starter
magnetic switch near the battery negative (--)
terminal lead, is:
30A
1. Turn the ignition switch OFF before checking
or replacing a fuse to prevent an accidental
short circuit.
2. Remove the seat(page 45).
3. Disconnect the wire connector (2) of the starter
magnetic switch (3).
4. Pull out the fuse. If the main fuse is blown,
install a new fuse. The spare main fuse (4) is
located near the starter magnetic switch.
5. Reconnect the wire connector and install the
seat.
106